Display; Fault Display - Bosch Compress 3000 DW FOO Installation Instructions Manual

7

Display

7.1

Fault display

Installation, maintenance and repairs may only be carried out by an authorised contractor. The following table lists the fault codes.
Display Description
E01 Fault in the top storage tank temperature sensor
E02 Fault in the bottom storage tank temperature sensor
E03 Fault in the temperature sensor at the air inlet
E05 Fault in the temperature sensor at the evaporator fins
E09 Incorrect system purging
Water pump blocked (water not recirculating)
Hydraulic circuit blocked (water not recirculating)
System unpurged due to water shortage
E10 Heating element faulty
Fault in the high limit safety cut-out
E11 Fault in the fan
Leak in refrigerant circuit
Fault in the compressor
Fault in the expansion valve
Fault in the dry filter
E13 Fault in the positioning of top storage tank temperature
sensor
E14 Fault in the fan
Air flow blockage
Table 8 Fault codes
Compress 3000 DW FOO
Solution
▶ Notify authorised contractor
▶ Notify authorised contractor
▶ Notify authorised contractor
▶ Notify authorised contractor
▶ Notify authorised contractor
▶ Reset the system
▶ Notify authorised contractor
▶ Reset the system and notify authorised contractor
▶ Notify authorised contractor
▶ Notify authorised contractor
Display | 43
6 720 808 869 (2014/06)