Advertisement
Li-ion battery:
Charging time:
Stand-by time:
Continuous working time:
Bluetooth name:
OPERATION
Charging
To 5-pin micro
USB port in hat
Plug the Micro USB cable into the headphones. Then,
connect the other end to the USB port of a computer.
While the device is charging, the LED will turn red. When
the LED turns off, the device is fully charged, and you
can disconnect the cable. NOTE: It should take about 2
hours to fully charge a completely drained battery.
Turning the device ON
Press and hold the
LED will begin to flash slowly.
Turning the device OFF
Press and hold the
device is off when the LED turns off.
Bluetooth pairing
When the device is off, press and hold the
5 seconds. The LED will flash alternately red and blue.
Turn on the Bluetooth function on your device. Select
"Magic Hat" on your device to pair it via Bluetooth.
NOTE: Some devices ask for a password when pairing
with speakers for the first time. If your device asks for a
password, enter "0000."
button for 3 seconds, The blue
button for 3 seconds again. The
3.7V/100mA
2 hours
Approx. 60 hours
Approx. 3.5 hours
"Magic Hat"
To computer USB
port or other power
source
button for
Hide quick links:
Advertisement
