Download Print this page

Terminating The Programme; Changing The Programme; Intensive Drying; Cleaning And Maintenance - Siemens SN series Operating Instructions Manual

Hide thumbs

Advertisement

3. To continue the programme, switch
on the ON/OFF switch ( again.
4. Close the door.
T erminating the programme
T e r m i n a t i n g t h e p r o g r a m m e
(Reset)
1. Open the door.
2. Press START button )" for
approx. 3 sec.
The numerical display 8 indicates
:
.
3. Close the door.
The programme sequence lasts
approx. 1 min. On the digital display
8 is indicated :
4. Open the door.
5. Switch off ON/OFF switch (.
6. Close the door.

Changing the programme

When the START button )" has been
pressed, the programme cannot be
changed.
The only way a programme can be
changed is by Cancel programme
(Reset).
.

Cleaning and maintenance

Intensive drying

The final rinse uses a higher
temperature which improves the drying
result. The running time may increase
slightly. (Caution if utensils are delicate!)
1. Open the door.
2. Switch on ON/OFF switch (.
3. Hold down programme button #
and press START button )" until
: .... is indicated on the digital
display.
4. Release both buttons.
The LED for button # flashes and
the digital display 8 displays the
factory setting :
5. Press programme button # until
the factory set value :
indicated on the digital display 8.
To change the setting,
1. Press the button 3 to switch the
Intensive drying on :
2. Press START button )".
The set value is saved.
3. Close the door.
Cleaning and
maintenance
n g
C l e a n i
A regular inspection and maintenance
of your machine will help to prevent
faults. This saves time and prevents
problems.
.
is
or off :
a n d
en
.
n a n c e
m a i n t e
25

Advertisement

loading

This manual is also suitable for:

Sx series