Download Print this page

iSP SP118 Owner's Manual

Passive subwoofer

Table of Contents

Need help?

Do you have a question about the SP118 and is the answer not in the manual?

Page 2  Care should be taken to avoid spilling any foreign objects or liquid into this unit.  Do not drive the SP118 into excessive heavy distortion for an extended period of time to avoid premature speaker failure.  Failure to follow these instructions may void the warranty.
Page 3 Caution: Exposure to extremely high noise levels can cause permanent hearing loss. The SP118 speaker system is capable of producing in excess of 126db SPL at 1 meter. Continued exposure to noise levels in excess of 90db may cause permanent hearing loss.
Page 4 PLACEMENT The SP118 is designed to sit directly on the floor or stage. Do not position or mount the cabinet where it can tip over and fall on someone. Do not attempt to mount the cabinet on speaker stands. Do not attempt to ‘fly’ (suspend by cables, chains, ropes, etc.) the cabinet.
Page 6 6.9 amps Power 800 watts Physical 32.5” (825mm) Height 24” (609mm) Front Width 20” (508mm) Depth Weight 85 lbs. Enclosure 18mm thick, 13 ply Baltic Birch plywood Mounting Methods Floor mount Note: D-CAT is a trademark of ISP Technologies LLC...
Page 7 7,035,413; 6,944,305; 6,931,134; 6,831,514; 6,091,013 NOTE: If it is determined that the power amp module has failed, it is possible for an ISP certified service center to remove the module from the cabinet by removing the mounting screws and disconnecting the speaker terminals and the transformer.