Loading The Envelope Feeder - Lexmark T640 User Manual

Loading the envelope feeder

The optional envelope feeder can accept a variety of envelope sizes. However, the envelope feeder must be adjusted
correctly to ensure trouble-free printing. To load the envelope feeder:
1
Adjust the envelope support for the length of envelope you are loading.
• Fully closed (pushed in toward the printer) for short envelopes
• Extended to the middle position for medium-length envelopes
• Fully open (extended to its full length) for long envelopes
Warning: Do not place objects on the envelope feeder. Avoid pressing down on it or applying excessive force.
2
Lift the envelope weight back toward the printer. It stays in place.
3
Slide the width guide to the far right.
4
Flex a stack of envelopes back and forth, and then straighten the edges on a level surface. Press down the
corners to flatten them.
Fan the envelopes. This prevents the edges of the envelopes from sticking together and helps them feed properly.
Printing
Loading the envelope feeder
55