Samsung OfficeServ ITP-5112L User Manual page 243

Hide thumbs Also See for OfficeServ ITP-5112L:
Table of Contents

Advertisement

Your keyset may be equipped with a Headset mode key. If it is so equipped press-
ing this key while the light is out will cause the keyset to enter headset mode and
the light will illuminate to indicate this. Pressing the key while the light is lit will
cause the keyset to return to handset mode and the light will go out.
HOT KEYPAD
On your phone system your keyset's keypad can be made "live" or "hot" so that it is
not necessary to lift the handset or press the SPEAKER key before you begin dial-
ing. Calls can be made and features activated by simply dialing the C.O. line num-
ber, trunk group access code, intercom number or feature access code. To activate
this feature:
With the handset on-hook, press TRANSFER and then dial 110.
Dial 031 to turn the Hot Keypad on or 030 to turn it off.
Press TRANSFER to store your selection.
KEY CONFIRMATION TONE
You can hear a short beep (confirmation tone) each time you press a button on the
dial pad. This tone can be turned on or off.
While on-hook, press TRANSFER and then dial 110.
Dial 040 to turn tones off or 041 to turn tones on.
Press TRANSFER to store your selection.
REJOINING A PAGE
This feature allows you to hear the remaining portion of an ongoing internal page
after you return your keyset to idle. To enable this feature:
With the handset on-hook, press TRANSFER and then dial 110.
Dial 051 to turn this feature on or 050 to turn it off.
Press TRANSFER to store your selection.
RING PREFERENCE
This feature automatically answers ringing calls when you lift the handset or press
the ANS/RLS key.This method will always answer calls in the order they arrived at
your keyset.When you turn ring preference off, you must press the flashing button
to answer a call, allowing you to answer calls in the order you choose.
With the handset on-hook, press TRANSFER and then dial 110.
Dial 061 to turn ring preference on or 060 to turn it off.
Press TRANSFER to store your selection.
44
Home Page
AUTO ANSWER CO CALLS
This option will allow CO calls that directly ring your phone to auto answer. When
a CO call arrives at your station and this option set for ON your phone will sound
two beeps, the same as when a screened transfer is completed, and you will be
connected to the CO call. In order for this option to work the station must also be
programmed for auto answer
(see SET ANSWER
While on hook, press TRANSFER and then dial 110.
Dial 151 to turn Auto Answer CO on or 150 to turn it off.
Press TRANSFER to store your selection.
NOTE: Outside lines must ring your station directly for the Auto Answer CO to
work. Lines ringing a station group will not cause your phone to Auto Answer the
call.
DISPLAY SPEED DIAL NAME
This option allows you to view the name associated with a speed dial number as
it is dialed.
With you handset on-hook, press TRANSFER and then dial 110.
Press 111 to turn DISP SPDNAME on or 110 to turn it off.
Press TRANSFER to store your selection.
CALLER ID REVIEW ALL
This feature allows display keyset users to review Caller ID information for calls
sent to their stations. This list can be from ten to fifty calls in a first in, first out
basis. The list includes calls that you answered and calls that rang your station
but that you did not answer. When reviewing this list, you can press one button
to dial the person back. The system must be using LCR to dial the stored num-
ber.
With you handset on-hook, press TRANSFER and then dial 110.
Press 121 to turn CID REVIEW ALL on or 120 to turn it off.
Press TRANSFER to store your selection.
SECURE OHVA
This option allows you to receive OHVA calls via the speaker while you are on the
handset.
With you handset on-hook, press TRANSFER and then dial 110.
Press 131 to turn AUTO CAMP-ON on or 130 to turn it off.
Press TRANSFER to store your selection.
Table of Contents
iDCS Keyset
MODE).
45

Advertisement

Table of Contents
loading

Table of Contents