Optra E310, E312 - Lexmark Laser Printers Label Manual

Optra E310, E312: Overview of Card Stock and Label Support
Paper Source
Automatic Paper Feeder
Manual Sheet Feeder
For paper and transparency specifications, refer to the printer User's Guide.
Media Specifications
Labels Width:
Length:
Weight:
Thickness:
Smoothness:
* 150 - 250 Sheffield is optimal. Using media higher than 300 Sheffield could result in printing degradation.
Card Stock Weight:
Note: Always use the front exit when printing on card stock. To minimize curl, use the front exit when printing
on labels.

Optra E310, E312

Limit label printing to occasional use of paper office labels
designed for laser printers. We do not recommend using vinyl
or polyester labels.
The Optra E310 and Optra E312 support stocks up to 43 lb
2
(163 g/m ). The automatic paper feeder can hold up to 10
sheets of card stock or labels.
The following table lists the maximum basis weights
supported by the automatic paper feeder and the
multipurpose feeder.
Card Stock
Index Bristol Tag
2
163 g/m 163 g/m
2
163 g/m 163 g/m
210 to 216 mm (8.3 to 8.5 in.)
279 to 297 mm (11 to 11.7 in.)
Up to 163 g/m
Up to 0.25 mm (0.01 in.)
100 to 400* Sheffield
Up to 163 g/m
Up to 163 g/m
Optra E310, E312
85
Cover
2 —
163 g/m
2 —
163 g/m
2
(43 lb)
2
Index Bristol (90 lb)
2
Tag (100 lb)
Labels
Paper Vinyl
2 —
2 —