Optra W810 - Lexmark Laser Printers Label Manual

Optra W810: Overview of Card Stock and Label Support
Paper Source
Tray 1
For paper and transparency specifications, refer to the printer User's Guide.
Media Specifications
Labels
* 150–250 Sheffield is optimal. Using media higher than 300 Sheffield could result in printing degradation.
Card Stock
When printing on labels:
• Set the Paper Type to Labels in the Paper Menu.
• Do not use label sheets with a slick backing material.
• Do not print within 1 mm (0.040 in.) of the die cut, the edge of the label, or the perforations, or
between the die cuts.
• Use full label sheets. Partial sheets may cause labels to peel off during printing, resulting in a
paper jam.

Optra W810

Limit label printing to occasional use of A4 or letter size paper
office labels designed for laser printers. We do not
recommend using vinyl or polyester labels.
The Optra W810 supports stocks up to 43 lb (163 g/m
Always feed labels and card stock from tray 1, which holds up
to 50 sheets of labels or card stock.
The following table lists the maximum basis weights
supported by tray 1.
Card Stock
Index Bristol
2
163 g/m 163 g/m
Width:
Length:
Weight:
Thickness:
Smoothness:
Width:
Length:
Weight:
Optra W810
Tag Cover
—
2
210 to 216 mm (8.3 to 8.5 in.)
279 to 356 mm (11 to 11.7 in.)
2
120 to 128 g/m (32 to 34 lb.)
0.13 to 0.20 mm (0.005 to 0.008 in.)
100 to 400 Sheffield*
210 to 216 mm (8.3 to 8.5 in.)
279 to 356 mm (11 to 11.7 in.)
2
Up to 163 g/m Index Bristol (90 lb)
114
2
Labels
Paper Vinyl
—
2
163 g/m
).