Qualcast GGT3001 Operating Instructions Manual page 5

OPERATING INSTRUCTIONS
NOTE: Before using the tool, read the
instruction book carefully.
ASSEMBLY/ADJUSTMENT
WARNING! The guard must always be
on the tool to protect the user.
1. FITTING THE GUARD (See Fig A)
Fix the safety guard to the trimmer head
making sure the sides are located into the
grooves on the trimmer head.
Secure the safety guard onto the trimmer
head with the screw provided (assembled on
the guard).
A
B
WARNING! Take great care when doing
this as the guard has a very sharp
cutting edge. (See Fig B)
WARNING! Never operate the tool
without the guard properly in place.
300 Watt
Electric Grass Trimmer
ORIGINAL INSTRUCTIONS
Use of the unit without having installed the
guard will cause the motor to overheat, and
void the warranty.
2. FITTING THE AUXILIARY HANDLE
(See Fig C1,C2)
NOTE: This may already be pre-fitted to the
trimmer. However the following instructions
give full assembly details.
1. Unscrew the auxiliary handle locking knob
(counterclockwise) and remove from handle.
2. Position auxiliary handle onto handle
bracket assembly located on trimmer's shaft.
3. Position the knob and screw through the
auxiliary handle and bracket, and tighten
knob (turn clockwise). Do not tighten
completely until you have adjusted the
auxiliary handle to your desired working
position.
C1
C2
3. ADJUSTING AUXILIARY HANDLE (See Fig D)
Unscrew the auxiliary handle locking knob.
HELPLINE NO 0844 8010979