Download  Print this page

Second-row Seat; Third-row Access; Power Third-row Seat - Cadillac SRX 2008 Personalization Manual

Customer convenience.
Hide thumbs


Easy Exit Seat
With the vehicle in Park (P), press the
(Easy Exit Seat) button to recall
the exit position for the driver's seat.
Press the button again to move the
seat back farther. The easy exit seat
also can be programmed to move
automatically using the DIC.


Adjusting the Seat
An adjustment lever to move the seat
forward or rearward is located under
each side of the 60/40 seat. After
adjustment, move the seat back and
forth to make sure it locks into place.


The right side of the second-row
60/40 seat has an easy entry feature
to make it easier to get into and out
of the third-row seat, if equipped.
To operate the easy entry seat:
1. Pull the release lever located on
the top of the seat upward.
2. Tilt the seatback forward by
pulling the top of the seat
3. Pull upward on the release lever
located on the back of the seat
and rock forward until it stops.


(If equipped)
The third-row seat includes a power-
folding feature to provide additional
cargo space. Before the seat can be
folded, the headrests must be
removed and stored.
Removing Headrests
1. Press the button on top of the
seatback below the headrest and
pull up on the headrest.
2. Open the storage compartment
cover behind the seat and insert
the headrest posts through the
slats in the carpet.
3. Position and snap the headrests in
the storage tray provided.
The seatback will not fold all the way
down if the headrests are not
Folding/Unfolding Seat
Before folding or unfolding the third-
row seat, all of the following
conditions must be met:
• The vehicle must be in Park (P) and
not have a low battery.
• The liftgate or right-side rear
door must be open.


Table of Contents

   Also See for Cadillac SRX 2008

Comments to this Manuals

Symbols: 0
Latest comments: