Remote Control - Panasonic CS-E9NKA Operating Instructions Manual

REMOTE CONTROL

Maximum
distance: 8m
Human activity
sensor and
indicator
Sunlight sensor and remote control receiver
Remote
Control display
9
3
7
8
14
Indicator
(Green)
(Green)
POWER
(Orange)
TIMER
(Green)
AUTO COMFORT
(Blue)
NANOE-G
(Orange)
POWERFUL
(Green)
QUIET
Press the remote control's button
1
TO TURN ON OR OFF THE UNIT
• Please be aware of the OFF indication on the remote
control display to prevent the unit from starting/stopping
improperly.
2
TO SET TEMPERATURE
• Selection range: 16˚C ~ 30˚C.
• Operating the unit within the recommended temperature
could induce energy saving.
HEAT mode : 20˚C ~ 24˚C.
COOL mode : 26˚C ~ 28˚C.
DRY mode : 1˚C ~ 2˚C lower than room temperature.
3
TO SELECT OPERATION MODE
AUTO mode - For your convenience
• During operation mode selection the power indicator
blinks.
• Unit selects operation mode every 30 minutes according
to temperature setting, outdoor and room temperature.
HEAT mode - To enjoy warm air
• Unit takes a while to warm up. The power indicator blinks
during this operation.
COOL mode - To enjoy cool air
• Use curtains to screen off sunlight and outdoor heat to
reduce power consumption during cool mode.
DRY mode - To dehumidify the environment
• Unit operates at low fan speed to give a gentle cooling
operation.
4
TO SELECT FAN SPEED (5 OPTIONS)
FAN SPEED
• For AUTO, the indoor fan speed is automatically adjusted
according to the operation mode.
5
TO ADJUST AIRFLOW DIRECTION (5 OPTIONS)
1
10
AIR SWING
6
2
• Keeps the room ventilated.
5
• In COOL/DRY mode, if AUTO is set, the louver swing
left/right and up/down automatically.
4
• In HEAT mode, if AUTO is set, the horizontal louver fi x at
predetermined position. The vertical louver swing left/right
after the temperature rises.
POWER