Garden Treasures PG167H-A User Manual page 9

ASSEMBLY INSTRUCTIONS
4. Attach door handle bezel (L) on both sides of the
door handle (M). Insert screw sheaths (K) into
the holes on the backside of door assembly
(J). Then, attach door handle assembly to
door assembly (J) using M6 x 16 mm bolts
(AA) through the screw sheaths (K) and into
the preassembled door handle bezels (L) on
door handle (M).
Hardware Used
M6X10 Bolt
AA
M6 x 16 mm Bolt
5. Insert the preassembled sheath on the
bottom of door assembly (J) into the base
assembly (R). Then, push down the
preassembled spring sheath at the top of
door assembly (J) until it locks into door
beam (Q).
6. Place table rack (H) into the cabinet and
table support bracket (G) against right panel
assembly (O). With holes aligned, secure
using M6 x 16 mm bolts (AA).
Repeat for left panel assembly (I).
Hardware Used
M6X10 Bolt
M6 x 16 mm Bolt
AA
x 2
X 2
X 6 x 6
9
4
M
M
L
5
Q
J
R
6
I
L
K
AA
J
H
G
AA
O