EmberGlo ES5 Installation Service

Emberglo es5 food steamer installation service manual

Advertisement

Quick Links

Installation Service
Manual
Designed to Operate without
Distilled Water
Warranty
Midco International Inc Warranty Policy
Exclusions Terms, Customer Requirements and Instructions
Only Authorized Service Providers are authorized to provide Warranty service on
all EmberGlo, a Division of Micdo International Inc., food equipment as described
under and Midco
®
International Warranty Policy. A list of providers can be found on
our web site: www.emberglo.com
Provisions:
In lieu of an implied warranty, all repairs and replacement parts furnished under
our Warranty shall be f.o.b. point of distribution, but the owner must pay the
necessary freight, delivery and labor costs involved when required. Any Federal,
State or Local taxes are also extra. This Warranty is effective for a period of 90
days from the date of original installation. EmberGlo
Equipment manufactured by Midco International, sold under the EmberGlo
trademark, are guaranteed to be free from defect in material and workmanship
under normal use and service for a period of 1 (one) year from the date of original
installation or for 1 (one) year when the registration card is returned within a
reasonable time after the date of original installation. Midco's obligation under this
Warranty Policy shall be limited to repairing or replacing, at our option, any part of
said equipment which Midco examination shall disclose to its satisfaction to be
thus defective.
Exclusions:
This Warranty Policy does not apply to damages resulting from accident, misuse,
abuse or alteration, nor does it apply to limed steam generators, nor does it apply
to any consequential damages. Most geographical areas require the use of
distilled or demineralized water. Tap water is permissible only with ES Series
Steamers. Midco's obligation will be the replacement of the product or parts
removed.
Terms:
EmberGlo
A Division of Midco International Inc.
4140 West Victoria Street
Chicago, Illinois 60646
tel
773.604.8700
fax 773.604.4070
web www.emberglo.com
®
Electric Food Preparation
SAFETY INFORMATION TERMS:
special notations and have standard meanings throughout this manual. When you see the safety alert symbol
and one of the safety information terms, as shown below, be aware of the hazard potential.
DANGER: Identifies the most serious hazards which will result in sever personal injury or death.
WARNING: Signifies hazards that could result in personal injury or death.
CAUTION: Identifies unsafe practices which would result in minor personal injury or product and
property damage.
Quality Designed for Proven Performance
ES5 Food Steamers
Under the terms of this Warranty Policy, models considered portable (devices with
cords and plug caps such as EmberGlo Steamers) must be taken or returned to
the nearest service provider, transportation prepaid, returned transportation
collect. Non-portable units with permanent wiring will be serviced on the
customer's premises. Under these terms, Midco agrees, within the terms of this
Warranty period, to make all repairs at no charge by the authorized service
provider. Labor and mileage charges submitted by any other provider not
authorized will be the responsibility of the customer.
Customer Requirements:
All charges related to repairs made after the one (1) year, when the registration
card is returned within a reasonable time after the date of original installation,
during the Warranty period will be the responsibility of the customer unless the
registration card has been properly filled out and returned to Midco International
Inc. The product registration information is located on the product I.D. plate.
If a part is defective due to workmanship or materials and is removed from the product
within the applicable warranty period and returned to Midco in accordance with the
following procedure described, Midco will, at its option, either repair or replace the part.
Call the factory for Instructions on returned goods.
No equipment may be returned without written
authorization from MIDCO. Returned goods must be
shipped prepaid to the factory.
WARNING: Improper installation and use of this
product could result in personal or property injury.
The following terms are used to identify hazards, safety precautions or
ES5TS: Timer Operation with Water Pan
ES5M:
Manual Operation with
Water Pan
ES5PBS: Manual Operation with Push
Button and Water Pan
ES5PB: Direct Connect with Push Button
ES5T:
Direct Connect with Timer
ES5PTS: Fixed Timer Operation with
Water Pan with Push Button
Model ES5PB
8449-96
Printed in USA
110

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ES5 and is the answer not in the manual?

Questions and answers

Summary of Contents for EmberGlo ES5

  • Page 1 Under the terms of this Warranty Policy, models considered portable (devices with Exclusions Terms, Customer Requirements and Instructions cords and plug caps such as EmberGlo Steamers) must be taken or returned to the nearest service provider, transportation prepaid, returned transportation Only Authorized Service Providers are authorized to provide Warranty service on collect.
  • Page 2: Installation

    After connecting, turn on water and check for leaks. 4. EmberGlo Steamers do not require a separate hood for vapor produced during operation according to the Uniform Mechanical Codes per the International Conference of Building Officials Code. And there are no requirements in NSF Standard 4 (2006e) for steamers to have ventilation.
  • Page 3: Maintenance Daily

    ES5 Series Installation and Service ES5PB & ES5PBS - It is important to hold the button in for 3 seconds of time. If the button is held too long, the generator will flood. If the button is held too short of a time, not enough water will be sprayed onto the generator to create enough cooking steam.
  • Page 4 ES5 Series Wiring Diagrams Figure 1a Wiring Diagrams for ES5 Series Steamers ES5M ES5PB ES5PBS ES5T with Mechanical Timer ES5TS with Mechanical Timer ES5 1800 Series Steamers have an 1800 watt heating element...
  • Page 5 ES5 Series Installation and Service Figure 1b Wiring Diagrams for ES5 Series Steamers Service DANGER: Before attempting service, unplug power cord. We recommend any service be done by qualified service personnel. Refer to separate Parts List for parts identification and assembly guide.
  • Page 6: Trouble Chart

    Only a trained experienced service technician should attempt any repair procedure. Qualified service agencies are available at most locations—Refer to EmberGlo listing of Authorized Service Agencies included in Standard Equipment Catalog. Important: Defective wiring or loose connections can simulate the defects outlined below.
  • Page 7 ES5 Series Trouble Chart care as bare wire terminals and/or bare wires are exposed. 2. Ready Light should go out when Main Timer button is pushed and then if at end of timing, Ready Light goes out and buzzer sounds—replace Shot Timer.
  • Page 8: Cooking Instructions

    ® EmberGlo 8449 96 A division of Midco International Inc. 4140 West Victoria Street * Chicago, Illinois 60646 tel 773.604.8700 fax 773.604.4070 web www.em b erglo.com email sales@emberglo.com Printed in USA...

Table of Contents