Key operation example
Ctrl + Menu
: Press and hold down Ctrl Key and press Menu Key
1 + Cam
: Press 1 Key, Cam Key sequentially
Ctrl + Joystick : Press and hold down Ctrl Key while manipulate Joystick Handle
Enter + Joystick : Press and hold down Enter Key while manipulate Joystick Handle
3.3.1 Keys for Dome camera
Function
Key Label
1,2, ... 9,0
1,2, ... 9,0
Camera
CAM
Full
MAIN
Cancel
ESC
Alarm
ALRM
Relay ON
Relay OFF
OFF
Previous
PREV
Next
NEXT
Home
HOME
Global
GLBL
Call Preset
PRST
position
Tour
TOUR
Pattern
PTRN
Auto Scan
SCAN
Configuration
MENU
Program
PGM
Control
CTRL
Enter
ENTER
Descriptions
Camera selection with Cam key.
Function number selection with function keys.
(e.g., 1+Cam, 3+Tour, 5+Scan, 6+Prst)
Displays the selected camera on the spot out of the multiplexer and allows the
camera to be controlled by the keyboard controller, if the selected camera is a dome
camera.
Camera No. 1~16+Main will display the selected camera full screen
Cancels current inputs.
Exits from currently running functions or menu, error status, etc.
Disregards all currently activated alarms and turns off the beep temporarily. If alarm
is activated again within the programmed hold time, the timer will restart and beep
again.
ON
Relay No. 1~4+ ON will activate the selected relay.
Relay No. 1~4+ OFF will disable the selected relay.
Allows the previous dome camera to be controlled manually.
Allows the next higher number dome camera to be controlled manually.
Immediately calls Home function.
Deletes selected value or function in programming mode
Sends all cameras to preset (e.g., 1, 2... 55 + Enter/Glbl).
888+Enter/Glbl: Night shot mode, 999+Enter/Glbl: Normal mode
Pressing Prst will bring up the preset programming menu.
Recalls preset; e.g.; 1, 2... 31... 240 + Prst
In the preset or tour programming mode, the operator can review the exiting preset
(selected by cursor) by pressing this key.
Pressing Tour will bring up the tour programming menu directly
Recalls programmed presets or functions sequentially. (e.g., 1 ~ 8+Tour)
Pressing Ptrn will bring up the pattern programming menu directly.
Repeats the selected pattern of the current dome camera. (e.g., 1 ~ 4+Ptrn)
Pressing Scan will bring up the Auto Scan programming menu.
Calls Auto panning function (e.g., 2+Scan repeats Auto Scan 2).
Enters programming menu.
Ctrl+Menu will invoke Keyboard set up menu
No.+Pgm+Prst will store current view as a preset directly.
No.+Pgm+Tour will open programming menu
No.+Pgm+Scan will open programming menu
Ctrl+Joystick : In a programming mode (Preset, Pattern, Scan, Privacy....) the
joystick operates as if in the normal control mode.
While pressing and holding down the Ctrl key, all movements of the joystick will start
recording when in the pattern programming menu.
Ctrl+Joystick:, In normal operation mode, manual speed of the joystick control will
be operated in turbo mode. (Max. speed = 380
Completes entering data for the password or title
ENTER+Joystick : Direction key in DVR remote mode or Mux ( PTZ, Mouse,
Cursor)
19
º
/sec)