Epson Stylus Photo RX 560 Service Manual page 90

EPSON Stylus PHOTO RX560/580/590
LUBRICATION AT INSTALLATION OF CARRIAGE ASSY
Shaft holder hole in the
Lubrication printer frame (for CR
Points Guide Shaft) (2
positions: right and left)
Type G-71
Amount of
ø 1x Half periphery
Application
Applying
Injector
Tool
Precautions
Lubrication Right and Left PG
Points Cams (Cam Contour)
Type G-71
Amount of
ø 1x One round
Application
Applying
Injector
Tool
Precautions
CR Guide Shaft
Lubrication
(Grooves for pressure
Points
springs)
Type G-71
Amount of
ø 1x 5 mm (x2)
Application
Applying
Injector
Tool
Precautions
Maintenance
Left side of Right side of
printer frame printer frame
G-71
G-71
Left side of Right side of
printer frame printer frame
G-71
G-71
Left side of Right side of
printer frame printer frame
G-71
G-71
LUBRICATION OF CARRIAGE ASSY AND CR GUIDE SHAFT
Lubrication CR Guide Shaft and
Points Carriage Assy
Type G-71
Area A:
210±20 mg (x2)
Amount of
Application
Area B:
210±20 mg (x2)
Applying
Injector
Tool
Make sure that the belt
and any parts other than
Precautions
those specified are free
from grease.
LUBRICATION OF FRONT FRAME
Sliding surface and
Lubrication spring catch area on the
Points front frame (2 positions
each: right and left)
Type G-71
ø 1x3 mm x2
Amount of
Application
ø 1x7 mm x2
Applying
Injector
Tool
Make sure that the
Eject Frame Assy
Precautions
moves up and down
smoothly.
Overview
Area B: Apply 210 ± 20 mg of G-21
to the CR Guide Shaft in its
middle area.
Area A Area A
Area A: Inject 210 ± 20 mg of G-71
into the hole
Left side of Right side of
front frame front frame
ø1x7
ø1x7
ø1x3
ø1x3
Revision A
90