Interfaces; Usb Interface; Infrared Communication Printing Function - Epson Stylus Photo RX 560 Service Manual

EPSON Stylus PHOTO RX560/580/590

1.2.3 Interfaces

The interfaces this unit is equipped with are as follows:
USB I/F
Mounted on the printer (for connection to a PC)
For printing of data from a USB storage (printing of data from an external
storage device, such as a DSC or CD-R disk or wireless printing by use of the
optional Bluetooth adapter)
Memory card slot (multi-slot)
IrDA (infrared communication with a mobile phone or the like)
C H E C K
Detailed information on above-mentioned external storage
P O I N T
devices, Bluetooth adapter and devices compatible with IrDA
(infrared data association) is available on EPSON web site.

1.2.3.1 USB Interface

Main specifications
Table 1-4. Main Specifications
Items
"Universal Serial Bus Specifications Revision 2.0"
Printer: "Universal Serial Bus Device Class Definition for Printing
Standards Devices Version 1.1"
Storage:"Universal Serial Bus Mass Storage Class Bulk-Only
Transport Revision 1.0"
Transfer rate 480Mbps (High Speed Device)
Data format NRZI
Compatible connector USB Series B
Maximum cable length Less than 2 m
External Storage Device Connection Ports
Recommended cable length: 2 m
Product Description
Specifications
Basic Specifications
Wireless printing is available by installing the optional Bluetooth adapter in the
External Storage Device Connection Port.
Table 1-5. Bluetooth Communication Basic Specifications
Items
Communication method Bluetooth standard specification Ver. 2.0 + EDR
Output Bluetooth standard specification Power Class 2
Communication distance Approx. 10 m (line-of-sight)
Frequency band used 2.4 GHz band (2.4 GHz to 2.4835 GHz)
Basic Printing Profile (BPP)
Basic Imaging Profile (BIP)
Supported profiles
Object Push Profile (OPP)
Hardcopy Cable Replacement Profile (HCRP)
Note : Subject to conditions such as obstructions between communication devices, radio wave condition,
magnetic field, static electricity, locations where interferences occur, software or OS used, receiver
sensitivity of communication devices, and antenna performance.

1.2.3.2 Infrared Communication Printing Function

Stylus PHOTO RX560/580/590 incorporates an infrared communication port on the
Main Board.
Items
Compliant with the infrared data communication standards (IrDA Ver.1.3
Standards
[Low Power option], etc.)
Communication speed 9.6 kbits/s-115.2 kbits/s, 0.576 Mbits/s, 1.152 Mbits/s, 4.0 Mbits/s
Communication distance 0-20 cm (without obstruction), Infrared range is as shown below.
• JPEG file
• vNote file (including support for NTT Docomo image transfer format)
Object data
• vCard file
• vCalendar file
• vMessage file
Infrared receiver
Revision A
Specifications
Specifications
SD/MMC/MS/xD Slot
CF Slot
11