Radio On/Off; Call Set Up; Channel Selection; Address Selection - Motorola GM950 User Manual

Call Set Up

Radio On/Off

To switch the radio on, press and release the ON/
OFF switch. The radio performs a self-test and a
high-pitched start-up tone will be heard.
When the self test is complete the radio will show
the General Display:
1 2 3 4 5
S
1 2 3 4 5 6 7
If the error tone sounds, please contact the person
in charge of your radio system or your local
Motorola dealer.
To switch the radio off, press and hold the ON/OFF
switch for 2 seconds, then release.
Call Set Up

Channel Selection

You must be in General Display to select a channel.
Use the up/down scroll buttons (8) to display the
desired channel number next to the channel
icon . The channel may be used as soon as it is
displayed.
4 Radio On-Off/Channel Selection/Address Selection
English
6 7 8
1 2 8

Address Selection

You can vary up to 7 digits to select the address of
another radio, using the keypad numeric buttons
(11) to select the desired digits.
When in General Display, pressing any numeric key
(0-9) displays the Edit Mode, the
together with the separator symbol and the
pressed numeric digit.
Entry is complete when the expected number of
digits is entered. Hyphens are displayed at the
empty positions where digits are expected to be
entered. If you attempt to enter too many digits, an
error tone will sound. The
enter the group call digit.
1 2 3 4 5 6 7
If a wrong digit is entered, momentarily press the
Clear button (9) and enter the correct digit. On
completion, press the
call button to set up the call. (See below - Sending
a Selective Call).
Your radio may be programmed to exit the Edit
Mode automatically, or you may manually exit by
pressing the Clear button for longer than 2
seconds.
icon is shown
button may be used to
#
button or a programmed