Motorola MOSCAD Owner's Manual page 5

Connection to MOSCAD - NFM Unit
The following figure describes the connection of the external Ethernet unit to the MOSCAD-NFM.
Note that the number shown next to an item is the kit number.
Port 1B, Port 2, or Port 3
* Install Suppression Core (Fair-Rite) P.N 044316415 on cable used for LAN connection.
** Use shielded cable for LAN connection
Connection of the External Ethernet Unit to the MOSCAD-NFM
Mounting the Ethernet Unit on the MOSCAD-NFM 19" Rack.
The following figure shows the Ethernet units mounting bracket for
Up to three Ethernet units can be mounted on each bracket.
Mount Locations of the Ethernet Unit on
AUX OUT
FKN4465A
FKN5953A
Mounting Bracket (PN6486691F01).
Screws are not included.
5
9VDC from the AUX outlet in
MOSCAD - NFM
Suppression Core*
(Fair-Rite)
19" Rack.
MOSCAD-NFM
19" Rack
MOSCAD-NFM
To LAN**