To build your booklet:
Remove the first bundle from the paper exit tray, fold it in half, and set it aside.
Remove the next bundle, fold it in half, and then stack it on top of the first bundle.
Continue to stack the bundles on top of each other until your booklet is complete.
Bind the bundles to complete your booklet.
You can load up to 25 sheets of labels at a time, depending on the thickness of the sheets.
Step 1: Load the labels
Use labels designed for inkjet printers.
If your labels include instructions, read them carefully.
Do not print within 1 mm (0.04 in.) of the edge of a label.
Load the labels vertically against the right side of the paper support.
Make sure there are no missing or curled labels.