Download  Print this page

Using The Counters; Using The Bobbin Thread Counter; Using The Production Counter - Brother BE-438C Instruction Manual

Electronic lockstitch button sewer.
Hide thumbs

Advertisement

11. USING THE COUNTERS

11. USING THE COUNTERS

11-1. Using the bobbin thread counter

If you use the bobbin thread counter to set the number of articles which can be sewn with the amount of bobbin thread
available, you can stop the bobbin thread running out in the middle of sewing a pattern.
5. Each time the sewing of a single article is completed, the number being displayed in the display window (6) will become
smaller. When the number of articles set by the bobbin thread counter have all been sewn, "0000" will be displayed in the
display window (6), and an alarm will start sounding continuously.
* The sewing machine will not operate during this time, even if the foot switch is depressed.
6. Replace the bobbin, and then press the RESET switch (4).
* The alarm will then stop sounding, and the number which was set in step 3. above will be re-displayed in the display
window (6).

11-2. Using the production counter

The production counter can be displayed in the display window (6) separately from the bobbin thread counter.
.
44
1. Press the SELECT switch (1) until the COUNTER
indicator (2) illuminates.
2. While pressing the TEST switch (3), press the RESET
switch (4).
* The COUNTER indicator (2) will flash and the counter
will switch to bobbin thread counter setting mode.
3. Press the DISPLAY SET switches (5) to set the number
of articles to be sewn.
• The bobbin thread counter can be set to sew a number
of articles from one ("0001") through to 9999 ("9999").
If the bobbin thread counter is set to "0000", sewing is
carried out without the number of articles sewn being
counted.
• If you press the RESET switch (4) while setting the
bobbin thread counter, the setting will return to "0000".
4. Press the TEST switch (3).
* The number displayed in the display window (6) will
then be stored as the bobbin thread counter setting.
2584Q
1. Press the SELECT switch (1) until the SPEED indicator
(2) illuminates.
2. While pressing the TEST switch (3), press the RESET
switch (4).
* The COUNTER indicator (5) and the SPEED indicator
(2) will illuminate, and the production counter will be
displayed in the display window (6).
• Press the RESET switch (4) to reset the production
counter to "0000".
• You can also press the DISPLAY SET switches (7) to
set the production counter to the desired value.
3. When the foot switch is depressed, the sewing machine
will start sewing.
4. If you press the TEST switch (3) or the SELECT switch
(1), the display will return to showing the bobbin thread
counter.
2585Q
BE-438C

Advertisement

Table of Contents

   Also See for Brother BE-438C

   Related Manuals for Brother BE-438C

Comments to this Manuals

Symbols: 0
Latest comments: