Adjusting Airflow Direction - Panasonic S-22MU1E5A Operating Instructions Manual

Adjusting Airflow Direction
This section is described in the instruction manual supplied with the timer remote contoller (CZ-RTC2).
Regarding the High-spec Wired Remote Controller (CZ-RTC3), refer to the Operating Instructions supplied with the model CZ-RTC3.
Adjusting the upward and downward motion of airflow direction (U1 and T2 types only)
„ Using the timer remote controller
"FLAP" button
„ Using the wireless remote controller
„ Adjusting the horizontal airflow direction
(Manual: T2 type only)
6
Airflow direction
display
Airflow direction display
"FLAP" button
Move the horizontal airflow vanes
by hand for adjustment.
Press /
Recommended vertical airflow direction
Set the flap to the downward position for heating operation.
z
(With the upward setting, warm air cannot reach the floor.)
Set the flap to the upward position for cooling operation.
z
(With the downward setting, condensation may drip on to the
floor.)
U1, T2 type
HEAT
Recommended
to select your desired airflow direction.
„ Flap swing motion
Pressing the button during
z
swing operation can stop the
flap at the desired position.
Display when swing operation
is stopped
Fan and Cooling and
heating drying
(5 levels) (3 levels)
„ Flap fixed (5 levels)
COOL / DRY FAN
Fixed to this
position
Recommended