1060 PCI Express Mini Card for wireless WAN
For access, remove these FRUs in order:
•
"1010 Battery pack" on page 59
•
"1020 Bottom door" on page 60
Table 13. Removal steps of PCI Express Mini Card for wireless WAN
1a
1b
In step
and
, unplug the jacks by using the removal tool antenna RF connector (P/N: 08K7159) or pick the
connectors with your fingers and gently unplug them in direction of the arrow.
Step
Screw (quantity)
2
M2 × 3 mm, small-head, nylon-coated (1)
Note: Plug the red cable into the jack marked MAIN, and the blue cable into the jack marked AUX on the card.
1b
1a
2
3
Color
Torque
0.181 Nm
Silver
(1.85 kgfcm)
.
Chapter 8
Removing and replacing a FRU
67