Turning The Stabilizing Feet - Lenovo ThinkServer TD100 Hardware Maintenance Manual

Turning the stabilizing feet

To rotate the front feet, complete the following steps.
1. Carefully position the server on a flat surface. The feet should hang over the
2. Press in on the clips to hold the feet in place; then, pry the feet away from the
3. Reinstall the feet in the opposite location. The tab on the feet should extend
80
ThinkServer TD100 and TD100x: Hardware Maintenance Manual
Feet
edge of the flat surface to ease removal.
server. In some cases, you might need a screwdriver to pry the feet from the
server.
beyond the edge of the server.
Feet