Installing The Device Driver In Windows Xp - Lenovo E75 User Manual

Installing the device driver in Windows XP

To install the device driver in Microsoft® Windows XP, do the following:
Note: You must download files from the Lenovo Monitor CD to use the Plug and Play feature
in XP.
1. Turn off the computer and all attached devices.
2. Ensure that the monitor is connected correctly.
3. Turn on the monitor and then the system unit. Allow your computer to start the Windows
XP operating system.
4. Open the
Display Properties
and then double-clicking the
Control Panel
5. Click the
Settings
6. Click the
Advanced
7. Click the
Monitor
8. Click the
Properties
9. Click the Driver tab.
10. Open the Hardware Update Wizard window by clicking on
the Next button.
11. Select "Install from a list or Specific location (Advanced)" and then click the Next button.
12. Insert the Lenovo Monitor CD into the CD drive and click the
13. Click OK.
14. Ensure that the CD drive letter is selected, and then select the "DRIVERS"
folder.
15. Select E75 CRT monitor and click OK. The files will be copied from
the CD to your hard disk drive.
16. Close all open windows and remove the CD.
17. Restart the computer.
The system will automatically select the maximum refresh rate and
corresponding Color Matching Profiles.
window by clicking
tab.
button.
tab.
button.
Start, Settings,
icon.
Display
20
and then click
Update Driver
button.
Have Disk