Installing The Device Driver; Installing The Device Driver For Windows 95 Or Windows 98 - Lenovo E75 User Manual

Installing the Device Driver

Installing the Device Driver for Windows 95 or Windows 98

To install the device driver in Microsoft® Windows®95 or Windows98, do the following:
Note: You must download files from the Lenovo Monitor CD to use the Plug and Play feature in
Windows 95 or Windows 98.
1. Turn off the computer and all attached devices.
2. Ensure that the monitor is connected correctly.
3. Turn on the monitor and then the system unit. Allow your computer to start the
Windows 95 or Windows 98 operating system.
Your computer's Plug and Play code might warn you that your system
hardware has changed. This means that it has detected your new
monitor for the first time.
4. Open the
Display Properties
and then double clicking on the
Control Panel
5. Click the
Settings
If you are using Windows 95:
6. 1. Click the
Change Display Type
2. Click the
Change Monitor Type
• If you are using Windows 98:
6. 1. Click the
Advanced
2. Click the
Monitor
3. Open the
Upgrade Device Wizard
on button and then select the Next button.
Change
4. Click "Display a list of the known drivers for this device so that
I can choose a specific driver" and then select the Next button.
7. Insert the Lenovo Monitor CD into the CD drive and click the
8. Click OK.
9. Ensure that the CD drive letter is selected, and then select "DRIVERS" folder.
10. Select E75 CRT monitor and click OK. The files will be copied from the CD to
your hard disk drive.
11. Close all open windows and remove the CD.
12. Restart the computer.
The system will automatically select the maximum refresh rate and
corresponding Color Matching Profiles.
window by clicking
tab.
button.
button.
button.
tab.
window by clicking
18
Start, Settings,
icon.
Display
Have Disk
button.