Front Panel Control; How To Adjust A Setting - Lenovo E75 User Manual

Lenovo color monitor user's guide
Hide thumbs Also See for E75:
Table of Contents

Advertisement

Notes
Do not install the monitor in a location near heat sources such as radiators
or air ducts , or in a place subject to direct sunlight , or excessive dust or
mechanical vibration or shock.
Save the original shipping carton and packing materials, as they will come
in handy if you ever have to ship your monitor.
For maximum protection, repackage your monitor as it was originally
packed at the factory.
To keep the monitor looking new, periodically clean it with a soft cloth.
Stubborn stains can be removed with a cloth lightly dampened with a mild
detergent solution. Never use strong solvents such as thinner, benzene, or
abrasive cleaners, since these will damage the cabinet. As a safety
precaution, always unplug the monitor before cleaning it.

Front Panel Control

Power Switch/Indica tor
and display the state of monitor.
MENU : Active OSD menu or function adjust confirm.
/
: Adjust contrast or function adjust.
Contrast
/
: Adjust brightness or function adjust.
Brightness
If OSD not shown on the screen, it is the bright shortcut key.
It may setup current brightness mode:If it default, that is text
mode(for the state of leaving factory).
In the case of the menu appear ,every time you press,it will switch
among text mode W ebpage browsing mode and video mode. It is for
you to choose the right mode.
EXIT : Exit a function or inactive OSD menu. Press and hold the "Exit"
button for 10 seconds to disable/enable the DDC/CI function.The words
"DDC/CI function disable/enable" will be showed on the scrren.
Power Indicator :
Green — Power On mode.
Orange — Power Saving mode.

How to adjust a setting

The monitor controls are accessed by pressing button MENU to enable OSD
(On-Screen-Display). The main menu will be displayed as follows.
If adjustment or selection of any OSD menu is not made for more than
Note:
10 seconds, the current setup will be saved and the OSD will disappear
automatically.
P ress this knob to switch ON/OFF of monitor's power.
:
Figure 4
The OSD Message
10

Advertisement

Table of Contents
loading

Table of Contents