Power Connections - Samsung DS 616 Technical Manual

DS 616
TECHNICAL MANUAL

2.6 POWER CONNECTIONS

• AC POWER CORD ASSEMBLY
The AC Power Cord Assembly plugs into the AC power socket which is located on the
left side of the cabinet. The AC connection is a standard 16 AWG computer type power
cord.
WARNING: DO NOT CONNECT AC POWER TO THE SYSTEM
Up Procedures)
• FUSE
CAUTION:
1. For continued protection against risk of fire, replace only with same type and
rating of fuse.
2. DISCONNECT POWER BEFORE CHANGING FUSE.
The current
! ! ! ! telecommunication circuits reference to the specific power supply or
current limiting device provided with the product detailed instructions
showing the proper method of installation and connections to the
telecommunication wiring system.
• POWER SUPPLY UNIT
The SPSU1 is the power supply for the DS 616 KSU. The power supply is permanently
installed in the KSU, and is protected by a metal cover. The power supply should only
be removed by a qualified service personnel.
WARNING: DO NOT CONNECT AC POWER TO THE SYSTEM
Up Procedures)
CAUTION:
Double pole / neutral fusing
+
ATTENTION:
Double pole / fusible sur le neuter.
limitations and maximum
2.5
INSTALLATION
PART 2 JUNE 2002
(see Section 4, Power
overcurrent protection
(see Section 4, Power
HOME
PAGE
Table of
Contents
for