Removing And Reinstalling The Front Bezel - Lenovo THINKCENTRE 4466 Hardware Maintenance Manual

Lenovo computer hardware user manual
Hide thumbs Also See for THINKCENTRE 4466:
Table of Contents

Advertisement

4. Remove any locking device that secures the computer cover, such as a padlock or an integrated
cable lock.
5. Remove any screws that secure the computer cover.
6. Press the cover-release button on the side of the computer and slide the cover to the rear of the
computer to remove the cover.
Figure 6. Removing the computer cover

Removing and reinstalling the front bezel

Attention:
Do not open your computer or attempt any repair before reading and understanding the "Important safety information"
in the ThinkCentre User Guide. To obtain a copy of the ThinkCentre User Guide, go to:
http://www.lenovo.com/ThinkCentreUserGuides
This section provides instructions on how to remove and reinstall the front bezel.
To remove and reinstall the front bezel, do the following:
1. Turn off the computer and disconnect all power cords from electrical outlets.
2. Remove the computer cover. See "Removing the computer cover" on page 79.
80
ThinkCentre Hardware Maintenance Manual

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents