Download Print this page

Maintenance; Service Information; Specifications - Black & Decker TC1100 Instruction Manual

4-3/8" (110mm) tile cutter
Hide thumbs

Advertisement

LUBRICATION
WARNING: NEVER spray or in any other way apply lubricants or cleaning solvents inside the tool. This can
seriously affect the life and performance of the tool and may result in personal injury. Black & Decker tools are
properly lubricated at the factory and are ready for use. However, it is recommended that, once a year, you take or
send the tool to a certified service center for a thorough cleaning and inspection.
ACCESSORIES
The performance of your tool depends on the accessory used. Black & Decker accessories are engineered to high
quality standards and designed to enhance the performance of your tool. By using these accessories you will get the
very best from your tool.

MAINTENANCE

Your tool has been designed to operate over a long period of time with a minimum of maintenance. Continuous
satisfactory operation depends upon proper tool care and regular cleaning.
WARNING: Before performing any maintenance, switch off and unplug the tool.
• Regularly clean the ventilation slots in your tool using a soft brush or dry cloth.
• Regularly clean the motor housing using a damp cloth. Do not use any abrasive or solvent-based cleaner.
PROTECTING THE ENVIRONMENT
Separate collection. This product must not be disposed of with normal household waste.
Should you find one day that your Black & Decker product needs replacement, or if it is of no further use to
you, do not dispose of it with household waste. Make this product available for separate collection.
Separate collection of used products and packaging allows materials to be recycled and used again.
Re-use of recycled materials helps prevent environmental pollution and reduces the demand for raw
materials. Local regulations may provide for separate collection of electrical products from the household,
at municipal waste sites or by the retailer when you purchase a new product.

SERVICE INFORMATION

Black & Decker offers a full network of company-owned and authorized service locations. All Black & Decker Service
Centers are staffed with trained personnel to provide customers with efficient and reliable power tool service. Whether
you need technical advice, repair, or genuine factory replacement parts, contact the Black & Decker location nearest you.

SPECIFICATIONS

Blade diameter
Watts
RPM
4-3/8" (110mm)
1200W
13000/min
17
ENGLISH

Advertisement

loading

  Also See for Black & Decker TC1100

  Related Manuals for Black & Decker TC1100

  Related Content for Black & Decker TC1100

This manual is also suitable for:

Tc1200