Chapter 3. On-Screen Display (Osd) Menu Settings; Osd Menu Controls; Navigating The Osd - Lenovo M500 User Manual

Chapter 3. On-screen display (OSD) menu settings

This section provides information on the On-screen display (OSD) menu settings.

OSD menu controls

The projector has an OSD that lets you make image adjustments and change various settings.
Note: You must have a display on the screen in order to access the OSD.

Navigating the OSD

You can use the remote control cursor buttons or the buttons on the top of the projector to navigate and
make changes to the OSD. The following illustration shows the corresponding buttons on the remote
control and on the projector.
Item
1 Menu
2 Left cursor button
3 Up and down cursor buttons
4 Right cursor button
1. To open the OSD, press the Menu button.
2. There are six menus. Press the left or right cursor buttons to move though the menus.
3. Press the up or down cursor button to move up and down in a menu.
4. Press the left or right cursor buttons to change values for settings.
5. Press the up or down cursor buttons to select a different sub-menu item for change.
6. If you wish to cancel all changes made within a sub-menu, select Cancel and press the Enter button.
7. Press Menu to confirm the new setting and leave the sub-menu, or to close the OSD from the main
menu screen.
© Lenovo 2006. Portions © IBM Corp. 2005.
1
4 2
3
Function
Opens and closes the OSD.
Navigates and changes settings in the OSD menus.
Navigates and changes settings up and down in the OSD menus.
Navigates and changes settings in the OSD menus.
3-1