Sanyo DP19649 Service Manual page 11

1-4: DIGITAL PCB (Refer to Fig. 1-5)
1. Remove the 2 screws (1).
2. Remove the Holder LCD in the direction of arrow (A).
3. Remove the 2 screws (2).
4. Remove the Holder LVDS-3 in the direction of arrow (B).
5. Remove the 2 screws (3).
6. Disconnect the following connector:
(CP501, CP2201 and CP8101).
7. Remove the Digital PCB in the direction of arrow (C).
Holder LCD
(2)
Holder LVDS-3
Digital PCB
Back Cabinet Ass'y C
DISASSEMBLY INSTRUCTIONS
(1)
(1)
(2)
(A)
(3)
(B)
(3)
(C)
Fig. 1-4
1-5: POWER PCB, REMOCON PCB and OPERATION PCB
(Refer to Fig. 1-5)
1. Disconnect the following connector: (CP7601).
2. Remove the 7 screws (1).
3. Remove the Power PCB in the direction of arrow (A).
4. Remove the screw (2).
5. Remove the Remocon PCB in the direction of arrow (B).
6. Push 9 supports (3).
7. Remove the Panel Side Ass'y in the direction of arrow (C).
8. Remove the 2 screws (4).
9. Remove the Operation PCB in the direction of arrow (D).
(1)
(1)
Power PCB
(A)
Back Cabinet Ass'y
Operation PCB
Panel Side Ass'y
B1-2 B1-2
(1)
(1)
(1)
(1)
(1)
(2)
Remocon PCB
(B)
(C)
(4)
(4)
(D)
(3)
(3)
Fig. 1-5