Disassembly Instructions; Removal Of Mechanical Parts And P.c. Boards - Sanyo DP19649 Service Manual

1. REMOVAL OF MECHANICAL PARTS
AND P.C. BOARDS
CAUTION
Be careful not to remove the LVDS cable forcibly, because
the LVDS cable may be damaged.
1-1: STAND ASS'Y (Refer to Fig. 1-1)
1. Remove the 2 screws (1).
2. Remove the Stand Ass'y in the direction of arrow.
1-2: COVER INVERTER (Refer to Fig. 1-2)
1. Remove the screw (1).
2. Remove the Cover Inverter in the direction of arrow.
3. Disconnect the following connectors:
(CP7001 and CP7002).
4. Remove the 2 screws (2)
5. Remove the 6 screws (3)
Cover Inverter
(3)
(2)
(2)
(3)

DISASSEMBLY INSTRUCTIONS

(1)
(1)
Stand Ass'y
Fig. 1 1 Fig. 1-1
(1)
(3)
(3)
(3)
(3)
Fig. 1-2
1-3: FRONT CABINET ASS'Y and LCD PANEL
(Refer to Fig. 1-3)
1. Turn up set and put the Front Cabinet Ass'y of LCD
on the top.
2. Remove the Front Cabinet Ass'y in the direction of
arrow (A).
3. Disconnect the following connector: (CD2801).
4. Remove the LCD Panel in the direction of arrow (B).
CD2801
(LVDS Cable)
LCD Panel
Back Cabinet Ass'y
B1-1 B1-1
(A)
Front Cabinet Ass'y
(B)
Fig. 1-3