Operation - Beko BKK 3030 TB User Manual

3

Operation

7. Connect the power plug to a suitable power
outlet.
8. The cutting speed can be variably adjusted with
the control dial .
I
Notes
• To operate the blender at the low speed, turn the
control dial to "1".
I
• If you want to blend with a higher speed, turn the
control dial to the desired speed level (2-3).
I
• For short pulses of blending with a high speed,
turn the control dial
the control dial , the blender will stop and re-
I
turn to "0" automatically.
• If ingredients are to be added during the blen-
ding process, then add them through the ope-
ning in the lid . To do this, take out the cap/
B
measuring cup .
A
9. After the desired consistency of the blended food
has been reached, turn the control dial
switch off the blender.
Caution
• Never run the blender for longer than 2 minutes,
otherwise it would overheat.
• After running the appliance for 2 minutes, let it
cool down before using it again.
• Be sure the motor has complete stopped before
removing glass jug
D
.
H
• Do not place any utensil (scraper, fork, etc.) in
the glass jug while blender is operating.
10. Pull the power plug out of the power outlet.
11. Take the glass jug
housing by turning it counterclockwise and
H
lifting the glass jug upwards
12. Take off the lid and pour the mixture into
glasses or other containers.
Jug Blender / User Manual
to "P". When you release
I
to 0 to
I
from the motor housing
off from the motor
D
.
C
9 / 42 EN