NEC MultiSync FE750 JC-17W40 User Manual page 15

Monitor
Specifications
Picture Tube
Input Signal
Display Colors
Synchronization
Range
Resolutions Supported
Resolution based on horizontal and vertical
frequencies only
Active Display Area
(Factory setting)
Active Display Area
(Full scan)
Power Supply
Current Rating
Dimensions
Weight
Enviromental Considerations
100
95
75
NOTE:
25
5
0
MultiSync FE1250
Monitor
Diagonal: 55.3 cm (22 inch)
Viewable Image Size: 50.8 cm (20 inch)
Radius: 57800 mm
ANALOG 0.7 Vp-p/75 Ω
Video:
Sync: Separate sync. TTL Level
Horizontal sync. Positive/Negative
Vertical sync. Positive/Negative
Composite sync. (Positive/Negative) (TTL Level)
Analog input: Unlimited number of Colors
Horizontal: 31 kHz to 110 kHz
Vertical: 55 Hz to 160 Hz
640 x 480 @ 60 to 160 Hz
800 x 600 @ 55 to 160 Hz
832 x 624 @ 55 to 160 Hz
1024 x 768 @ 55 to 136 Hz
1152 x 870 @ 55 to 120 Hz
1280 x 1024 @ 55 to 102 Hz
1600 x 1200 @ 55 to 88 Hz . . . . . . . . . . . . . . . . . .
1792 x 1344 @ 55 to 78 Hz
1800 x 1440 @ 55 to 73 Hz
1856 x 1392 @ 55 to 75 Hz
1920 x 1440 @ 55 to 73 Hz
Horizontal: 396 mm
Vertical: 297 mm
406 mm
305 mm
AC 100-120 V / 220-240 V, 50/60 Hz
1.4 A @ 100-120 V / 0.7 A @ 220-240 V
483 (W) x 501 (H) x 472 (D) mm
32.0 kg
Operating Temperature: +10° C to +35° C
Humidity: 30% to 80%
Altitude: 0 to 3000 m
Storrage Temperature: -20° C to +60° C
Humidity: 10% to 90%
Altitude: 0 to 13700 m
Technical specifications are subject to change without notice.
Notes
90° deflection, 0.25-0.27 mm (variable) grille pitch,
medium short persistence phosphor, aperture grille
CRT, multi-layered, anti-static screen coating,
semi-dark tint screen, and OptiClear screen surface.
Depends on the display card
Automatically
Automatically
Some systems may not support all modes listed
NEC cites recommended resolution at 85 Hz for
optimal display performance.
Dependent upon signal timing used, and does not
include border area.
Dependent upon signal timing used, and does not
include border area.
E - 13