Panel Display
PAPER END SELECTED TRAY
SELECTED TRAY IS NOT INSTALLED
REMOVE PAPER OUT OF DUPLEX
INSTALL CASSETTE TRAY OPEN
Print patterns (cannot be used for print quality checking)
Pattern 0
Pattern 4
Note: Solid black print (pattern 7) is included in the local printing function.
An offset occurs when it is output at 100% in each color. To prevent this,
the number of the colors to print concurrently to produce solid print copies
of the No. 7 needs to be limited not more than two by making print color
settings as instructed in step 3
The following message appears during printing:
P: Number of test print pages
W: Wait time
The displays are switched by pressing [2].
0 and 8 to 15: Each prints a blank page.
Pattern 1
Pattern 5
Detail
No paper exists.
The selected tray is not installed.
An internal error of the duplex unit.
A cassette is slid out.
Pattern 2
Pattern 6
Pattern 3
Pattern 7
29