Sony DSLR-A700 User's Manual / Troubleshooting page 157

The setting is reset without the resetting operation.
• The battery pack was removed when the POWER switch was set to ON. When removing the
battery pack, make sure the POWER switch is set to OFF and the access lamp is not
illuminated
(--+
step 1 in "Read This First").
The camera does not work properly.
• Tum off the camera. Remove the battery pack and insert it again. If an AC Adaptor/charger
(not supplied) is used, disconnect the power cord. If the camera is hot, allow it to cool down
before trying this corrective procedure.
The five bars of the Super SteadyShot scale flash.
• The Super SteadyShot function does not work. You can continue to shoot but the Super
SteadyShot function will not work. Turn the camera off and on. If the Super SteadyShot scale
continues to flash, consult your Sony dealer or local authorized Sony service facility.
"--E-" is indicated on the lower-right corner of the LCD monitor.
• Remove the memory card, and insert it again. If this procedure does not turn off the
indication, format the memory card.
157