Leica 2 User Manual page 13

You are now in the Utilities \ Format
Memory Module panel:
If you want to format the PC-card just
press F1 CONT to format the card. If
you want to format the internal
memory press ENTER. A list-box
opens which allows you to select the
internal memory.
13
Use the cursor key to highlight
Internal, then press ENTER. Then
press F1 CONT in order to start the
formatting process of the internal
memory.
By activating the format
command all data will be
lost! Make sure that all
important data which resides on the
PC-card is properly backed-up before
reformatting the card. If you want to
reformat the internal memory make
sure that all important data is first
transferred to the PC.
If you realise that you do not want to
format the memory device, simply
press ESC instead of F1 CONT. This
key-stroke brings you always a step
back into the previous panel without
execution of any command.
Once the formatting of the card is
completed the MAIN\ panel will
appear.