Chassis Fan - HP Compaq Businessdc7600 Service & Reference Manual

Table of Contents

Advertisement

7.20 Chassis Fan

1. Prepare the computer for disassembly
2. Remove the computer cover
3. Remove the fan shroud
4. Disconnect the chassis fan cable from the system board.
5. Remove the four screws that secure the fan to the chassis, then remove the fan from the
chassis.
To install the chassis fan, reverse the removal procedure. Be sure to orient the air flow into the
unit. Refer to the air flow arrows on the side of the fan housing for proper air flow orientation.
Service Reference Guide, dc7600
Removal and Replacement Procedures— Small Form Factor (SFF) Chassis
(Section
7.1).
(Section
7.5).
(Section
7.12).
390742-001
7–47

Advertisement

Table of Contents
loading

Table of Contents