3Type 3 Battery Holder - HP Compaq Businessdc7600 Service & Reference Manual

Table of Contents

Advertisement

Removal and Replacement Procedures - Convertible Minitower (CMT) Chassis
6.17.3 Type 3 Battery Holder
1. Pull back on the clip 1 that holds the battery in place, then remove the battery 2.
2. Insert the new battery and position the clip back in place.
3. Replace the computer access panel.
4. Plug in the computer and turn on power to the computer.
5. Reset the date and time, your passwords, and any special system setups, using Computer
Setup. Refer to the Computer Setup (F10) Utility Guide.
6–32
390742-001
Service Reference Guide, dc7600

Advertisement

Table of Contents
loading

Table of Contents