Connecting A Dtv(Digital Tv); Connecting Digital Audio Output - Haier L4269 User Manual

External Equipment Connections

Connecting a DTV(digital TV)

This TV can receive Digital Over-the-air/Cable signals without an external digital set-top box. However, if you do receive
Digital signals from a digital set-top box or other digital external device, refer to the figure as shown below.
This TV supports HDCP (High-bandwidth Digital Contents Protection) protocol for Digital Contents (480p,720p,1080i).
How to connect
Use the TV`s COMPONENT , VGA or HDMI
jack for video connections, depending on
your set-top box connector. Then, make
the corresponding audio connections.
How to use
1. Turn on the digital set-top box. (Refer to the
owner`s manual for the digital set-top box.)
2. Use INPUT on the remote control to select
COMPONENT , VGA or HDMI source.
Signal COMPONENT
480i Yes
480p Yes
720p Yes
1080i Yes
1080p Yes
Connecting a digital audio output
Send the TV`s audio to external audio equipment (stereo
system) via the Digital Audio Output (Optical) port.
How to connect
1. Connect one end of an optical cable to the TV Digital
Audio(Optical) Output port.
2. Connect the other end of the optical cable to the digital
audio (optical) input on the audio equipment.
See the external audio equipment instruction manual for
operation.
Note
When connecting with external audio equipments, such
as amplifers or speakers, please turn the TV speakers off.
!
Caution: Do not look into the optical output
port. Looking at the laser beam may damage
your vision.
HDMI
Yes
Yes
Yes
Yes
Yes
2
1
Pb L
Y Pr AUDIO R
1
VIDEO VIDEO L AUDIO AUDIO R S-VIDEO S-VIDEO L AUDIO AUDIO
Digital Set-top Box
2
1
Y Pb Pr L
1
S-VIDEO S-VIDEO
VIDEO VIDEO L AUDIO R
2
L
DVI AUDIO DVI AUDIO
1
R
VGA AUDIO VGA AUDIO VGA
R VIDEO VIDEO L AUDIO AUDIO R
HDMI
L
DVI AUDIO DVI AUDIO
R
AUDIO AUDIO R VGA AUDIO VGA AUDIO VGA
L AUDIO R VIDEO VIDEO L AUDIO
Owner s Manual 11
Installation
2
1
R