Panasonic SC-PT770 Operating Instructions Manual page 23

To rotate a picture (during pause)
[JPEG]:
0,------. 90,------.180,------.270
ROTATION
^--------------------------------------------J
Menu 2 (Video)
NORMAL
CINEMA1:
PICTURE MODE
CINEMA2:
DYNAMIC:
ANIMATION:
To select zoom sizes
NORMAL, AUTO ([DVD-VR] [DVD-V] [VCD]), k2, k4
≥ [JPEG]: during pause
ZOOM
If you have chosen "480p"/"720p"/"1080p"
(progressive), "1080i" (interlaced)
["VIDEO FORMAT" in Menu 4 (HDMI)] or
TRANSFER
"PROGRESSIVE" under "VIDEO OUT (I/P)"
MODE
( 28, VIDEO menu), select the method of
conversion for progressive output to suit the type
of material.
≥ The setting will return to "AUTO1" when the
disc tray is opened, the unit is turned off or
another source is selected.
AUTO1:
AUTO2:
VIDEO:
Menu 3 (Audio)
To make the dialogue in movies easier to hear
[DVD-V] (Dolby Digital, DTS, 3-channel or higher,
with the dialogue recorded in the center channel)
DIALOGUE
OFF, ON
ENHANCER
Mellows images and enhances
detail in dark scenes.
Sharpens images and enhances
detail in dark scenes.
Enhances the contrast for
powerful images.
Suitable for animation.
Automatically detects the film and
video content, and appropriately
converts it.
In addition to "AUTO1",
automatically detects film
contents with different frame rates
and appropriately converts it.
Select if the video content is
distorted when using "AUTO1" or
"AUTO2".
Menu 4 (HDMI)
To show HDMI information.
HDMI
( below, Confirming HDMI information)
HDMI STATUS
This works when the HDMI connection is being
used with "VIDEO PRIORITY" (
menu) set to "ON".
HD ENHANCER
To sharpen the "720p", "1080i" and "1080p"
picture quality
OFF, 1 (weakest) to 3 (strongest)
This works when the HDMI connection is being
used with "VIDEO PRIORITY" (
menu) set to "ON".
VIDEO FORMAT
To select suitable picture quality with your TV
(Video recordings will be converted to, and output
as, high-definition video.)
480p/720p/1080p (progressive)
§
480i/1080i (interlaced)
§
≥ If the picture is distorted, press and hold
[CANCEL] until the picture is displayed
correctly. (The output will return to "480p".)
The numbers displayed depend on the disc
§
being played. One of the above numbers is
displayed.
This works when the HDMI connection is being
used with "VIDEO PRIORITY" (
menu) set to "ON".
COLOR SPACE
To select suitable picture color with your TV
YCbCr 4:2:2
– Luminance and color details are sent
separately. Most of the picture details are in
luminance. The color rate is much higher than
composite video. Compatible with all TV
models.
YCbCr 4:4:4
– All color details are sent. Luminance and
color details are in the same signal.
RGB
– Component video type of signal.
≥ If the setting above is not compatible with your
TV, it will not be displayed.
§ Terms are descriptions of the sample formats
used in digital video. YCbCr is a video signal
for luminance (Y), blue (Cb) and red (Cr)
details.
Confirming HDMI information
e.g.
1
CONNECTED STATE
2
AUDIO STREAM
3
MAX CHANNEL
4
VIDEO FORMAT
5
COLOR SPACE
1 Connection status
2 Shows the output signal type.
3 Shows the number of audio channels.
4 ( above, VIDEO FORMAT)
5 ( above, COLOR SPACE)
[Note]
When "OFF" is selected in "AUDIO OUT" (
be displayed in "AUDIO STREAM".
29, HDMI
29, HDMI
29, HDMI
§
§
HDMI --- INFORMATION
CONNECTED
PCM
2ch
720p
YCbCr 4:4:4
29, HDMI menu), "– – –" will
23