Basic Play; Using The Main Unit - Panasonic SC-PT770 Operating Instructions Manual

Basic play

Playing Discs
If you are experiencing problems, refer to troubleshooting (
Preparation
To display the picture, turn on your TV and change its video input mode (e.g. VIDEO 1, AV 1, HDMI, etc.) to suit the connections to this unit.

Using the main unit

1
POWER
Turn on the unit.
Selecting
the desired
tray
Press [<OPEN/CLOSE] again to close the tray.
[Note]
≥ DISC CONTINUES TO ROTATE WHILE MENUS ARE DISPLAYED.
To preserve the unit's motor and your TV screen, press [∫] (Stop) when you are finished with the menus.
≥ Total title number may not be displayed properly on iR/iRW.
18
3
OPEN CLOSE
Open all the disc trays.
≥ To select a desired tray (
≥ Press [<OPEN/CLOSE] again to close all the disc trays.
4
Load the disc.
≥ Load double-sided discs so the
label for the side you want to play is
facing up.
≥ Press [EXCHANGE] to load discs
one by one.
≥ For DVD-RAM, remove the disc
from its cartridge before use.
≥ Do not:
– Load more than one disc per tray.
– Push or pull out the tray by hand.
1 2
5 DISC SELECTOR
Press to select a disc directly.
≥ You can also select the disc using the remote
control ( 19, Selecting a disc).
1 2 3 4
5 DISC SELECTOR
OPEN CLOSE
32 to 33)
2
SELECTOR
Select "DVD/CD".
below, Selecting the desired tray).
Label
facing up
1 2 3 4 5 EXCHANGE
5 DISC SELECTOR
EXCHANGE
3 4 5
5
Change
discs
without
interrupting
playback
5
Start play.
≥ Turn [`, i VOLUME] to
adjust the volume.
(Stop)
SELECTOR TUNE
, + VOLUME
TUNE
Press to skip.
Press and hold to:
– search during play
– start slow-motion play during pause
≥ Press [1] (Play) to start normal play.
During play,
EXCHANGE
≥ All trays are opened (except the tray where the disc
is playing).
≥ Press [EXCHANGE] to close the top tray.
Press again until all the trays are closed.
≥ Press [<OPEN/CLOSE] to close all the open trays.
VOLUME
Pull open