Table of Contents
Advertisement
SYSTEM CONFIGURATION
Single system configuartion (PTZ connected directly)
Multi Port
Multi Port
Multi Port
Multi system configuration
Rx +
Rx -
Rx +
Tx+
Tx-
Tx+
Tx-
Tx+
Tx-
Tx+
Tx-
Rx+
Rx-
Tx+
Tx+
Tx-
Tx+
Tx-
Tx+
Tx1+ Tx1- Tx2+ Tx2- Tx3+ Tx3- Trx+ Trx-
Max16
CAMERA
Max16
DVR
Max16
Rx -
CAMERA
Tx+
Tx-
Multi Port
Max16
Tx-
Rx+
Rx-
DVR
Tx-
Tx+
Tx-
Multi Port
PTZ CONTROL
1.Power On
This device has two types of power use.
1)Connect provided adaptor to power.
2)Insert 9V batteries inside.(Do not connect adaptor.)
3)Power on external devices which are connected to this device
before power on of this device.
4)Turn on the power by pressing
button.
5)
will be displayed on the screen.
[WDS PEL-D 2.4K]
ID : 001
2. Start page displayed
-1. ID: Shows the ID of the currently selected camera.
-2. Shows the currently selected protocol.
[WDS PEL-D 2.4K]
ID : 001
3.Camera ID Set up
-1. Input wanted number button in the number pad.
-2. Press
button then Camera ID will be set up as your selected number.
ENT
* 1-255 numbers are selectable. When the number outside the range of inputs selected, last selected
numbers will be treated as the first digit.
[WDS PEL-D 2.4K]
ID : 001
Advertisement
Table of Contents
