Use this function to choose your desired aspect ratio.
Automatically adjusts vertical image.
Adjust image distortion caused by tilting projection.
<Note> The Manual Keystone function is unavailable under Auto
Keystone setting to "On".
Front-Desktop: The factory default setting.
Rear-Desktop: When you select this function, the projector
reverses the image so you can project from behind a translucent
Rear-Ceiling: When you select this function, the projector
reverses and inverts the image at same time. You can project from
behind a translucent screen with ceiling mounted projection.
Front-Ceiling: When you select this function, the projector
inverts the image for ceiling-mounted projection.
Front: The factory default setting.
Rear: Reverses the image so you can project from behind a
Auto: Automatically adjusts projection location of image.
Ceiling: Turns the image upside down for ceiling-mounted
Auto: Keep the image with original width-higth ratio and maxi
mize the image to fit native horizontal or vertical pixels.
Full: Resize image to fit full screen by width (1280 pixels) and
height (800 pixels).
4:3: The image will be scaled to fit the screen and displayed using
a 4:3 ratio.
16:9: The image will be scaled to fit the width of the screen and
the height adjusted to display the image using a 16:9 ratio.
L.Box: Keep original signal aspect ratio and zoom in by 1.333