D-Link DIR-859 User Manual page 34

Section 4 - Configuration
Choose PPTP (Point-to-Point-Tunneling Protocol ) if your Internet Service Provider (ISP) uses a PPTP connection. Your ISP will provide you with a
username and password.
PPTP Server IP Enter the PPTP server IP address provided by your ISP.
Address:
Username:
Enter the username provided by your ISP.
Password:
Enter the password provided by your ISP.
Reconnect Select either Always-on, On-Demand, or Manual.
Mode:
Maximum Idle Enter a maximum idle time during which the Internet connection
Time:
is maintained during inactivity. To disable this feature, enable Auto-
reconnect.
Address Mode: Select Static IP if your ISP assigned you the IP address, subnet mask,
gateway, and DNS server addresses. In most cases, select Dynamic IP.
PPTP IP
Enter the IP address provided by your ISP (Static IP only).
Address:
PPTP Subnet Enter the subnet mask provided by your ISP (Static IP only).
Mask:
PPTP Gateway Enter the gateway IP address provided by your ISP (Static IP only).
IP Address:
Primary DNS Enter the primary DNS server IP address assigned by your ISP.
Server:
D-Link DIR-859 User Manual
PPTP
30