D-Link DIR-859 User Manual page 33

Section 4 - Configuration
Select PPPoE if your Internet connection requires you to enter a username and password. This information is provided by your Internet service
provider (ISP).
Username:
Enter the username provided by your ISP.
Password:
Enter the password provided by your ISP.
Reconnect Select either Always-on, On-Demand, or Manual.
Mode:
Maximum Idle Enter a maximum idle time during which the Internet connection
Time:
is maintained during inactivity. To disable this feature, enable Auto-
reconnect.
Address Mode: Select Static IP if your ISP assigned you the IP address, subnet mask,
gateway, and DNS server addresses. In most cases, select Dynamic IP.
IP Address:
Enter the IP address provided by your ISP (Static IP only).
Service Name:
Enter the ISP service name (optional).
Primary DNS
Enter the primary DNS server IP address assigned by your ISP.
Server:
Secondary DNS Enter the secondary DNS server IP address assigned by your ISP.
Server:
MTU: Maximum Transmission Unit - you may need to change the MTU for
optimal performance with your ISP.
Click Save when you are done.
D-Link DIR-859 User Manual
PPPoE
29