Table of Contents
Advertisement
•
You can assign CLIP and DDI/MSN numbers at System Speed Dialling locations 000-699.
CLIP numbers can be assigned at the location 000-499. DDI/MSN numbers can be
assigned at locations 500-699. We recommend that wild card numbers for CLIP be stored
starting at location 499, and then 498, 497, etc. That is, go backwards numbers starting
from 499.
We recommend the preceding because if you assign the wild card number "9-
012
according to that routing — even though you assign "9-0123456789" at another location.
This is because the CLIP or your DDI/MSN number is analysed sequentially from 000 to
699.
•
When you assign a wild card, be sure to enter the whole number. For example, when the
telephone number has 10 digits and you want to assign an area code as the wild card,
assign "9-012
•
If you assign a wild card number at the locations 000-499, the name assigned in
4.2.4 System Speed Dialling and Intelligent Call Handling Name Set (002) will not be
displayed when receiving the call. (Refer to 2.10.2 Recording a Call Log [KX-T7433, KX-
T7436, KX-T7230, KX-T7235 only]. )
•
Up to 60 handling table numbers of Day/Night mode can be assigned for each 700 System
Speed Dialling and Intelligent Call Handling number. The receiving pattern can be assigned
for each handling table number. Intelligent Call Handling table number 61 and 62 are
reserved to handle calls which the system cannot analyse. Be sure 61 (for day mode) is
assigned to at least 1 extension and 62 (for night mode) is assigned to at least 1 extension.
The destinations of 61 and 62 cannot be a floating extension, a phantom extension, or a
voice mail extension.
•
The System Speed Dialling/Intelligent Call Handling numbers are used for the call
identification. For proper operation, a hyphen must be inserted after the line access
number. Additionally, the area code must be stored always (even for local numbers in the
same area).
•
Up to 24 DDI/CLIP keys can be located at a CO button on a digital proprietary telephone.
DDI/CLIP key is provided in accordance with CLIP and DDI/MSN call handling. Both of
answering and making calls are possible with DDI/CLIP keys. Making a call with DDI/CLIP
key is available for System Speed Dialling numbers stored in location 000-499.
•
It is possible to make the ringing tone of each DDI/CLIP key distinctive. This allows the user
of DPT without display to discriminate the caller of the incoming call. Refer to
4.1.3 Customising the Buttons.
Customising Your Phone
•
4.1.3 Customising the Buttons
Create or re-arrange a DDI/CLIP key.
User Manual
" at location 000, then all calls that start with "012" will be processed
". ("012" is an example of an area code.)
Customising Your Phone & System
217
Advertisement
Table of Contents
