CMO Operations & Logistics
WW Service Solutions & Development
Bochum / Germany
14. BLUETOOTH & INFRARED TEST
You need another Bluetooth device (e.g. 6230) to do a GoNoGo test.
Make sure that Bluetooth is activated in the reference unit. The distance of the devices should be not more than
5m from each other.
You need another infrared device (e.g. 6230) to do a GoNoGo test. The infrared windows of the devices must be
directed to each other and should have a distance of approximate 15 cm. Make sure that infrared is activated in
Warning: Do not point the IR (infrared) beam at anyone's eye or allow it to interfere with other IR devices. This
device is a Class 1 Laser product.
Settings on the test unit:
Press the red End key to reach the Home Menu
Select Names and select Search for an entry
If phone and SIM memory is empty, create one new entry.
Select an entry and select Details
Select Send business card
A) - for infrared test: Select Via infrared
If sending of business card fails, make sure again that infrared windows are directed to each other and
infrared is activated in reference device. Then try again sending.
Test was successful, if you get this message on receiver device.
You will not get a confirmation on sender device.
B) - for Bluetooth test: Select Via Bluetooth
If needed (for e.g. after a sw-update), enter a name for this device
Search window appears, if all Bluetooth devices in range will be displayed, the test is successful!
Press red End key to reach the Home Menu
Note: If the Bluetooth is activated, switch it off!
Service Manual 6021 Level 1&2
Reference unit, Bluetooth /infrared activated
Copyright © 2005 NOKIA Corporation. All rights reserved.