continued
To check the remaining time during
playback
Press DISPLAY repeatedly.
Each time you press the button, the
display changes as follows:
mPlaying time on the current track
µ
Remaining time on the current track
µ
Remaining time on the CD
µ
Clock display (for eight seconds)
µ
Effect (or P FILE) name or
“EFFECT ON (OFF)”
To check the total playing time and
the total number of tracks
Press DISPLAY in stop mode. When you
press DISPLAY again, the display shows
the clock display for eight seconds and
returns to the previous indication.
EN
Notes
•You cannot check the total playing time
8
during program play.
•The total playing time and number of
tracks also appear in the display when
you press § OPEN/CLOSE to close the
disc tray.
•“--.--” appears in the display when the
total playing time is 100 minutes or more.
One Touch Play feature
Press fl on the CD player (or CD
on
the remote) when the power is off. When a
CD is in the player, you will be able to start
listening to the CD without pressing any
other buttons.
The Music Calendar Display
This display lights according to the number
of tracks on the CD. As each track is played,
the corresponding number disappears.
Tracks numbered in excess of 20 are not
displayed.
Automatic Source Selection
If the CD player has been in the normal
play mode, you can select the CD player
just by pressing fl (or CD
on the
remote).
If the CD player has been in the program
play or the shuffle play mode, only fl can
be used for this function.
If there is no CD in the player
“CD no dISC” appears in the display.
Press fl (or CD
on the remote) while
the indication is on, then the disc tray will
open automatically.
Chapter 2: the CD Player