Switching Visibility; Entering The Pin Code For Bluetooth Wireless Connection; Displaying The Device Information; Clearing The Bluetooth Memory - Pioneer AVH-X5790BT Owner's Manual

Registration and connection of Bluetooth device

Switching visibility

This function sets whether or not to make this product visible to
the other device.
1 Display the "Bluetooth" screen.
 Displaying the "Bluetooth" screen on page 11
2 Touch [Visibility] to switch "On" (default) or
"Off".
Entering the PIN code for
Bluetooth wireless connection
To connect your Bluetooth device to this product, you need to
enter a PIN code.
You can change the PIN code with this function.
1 Display the "Bluetooth" screen.
 Displaying the "Bluetooth" screen on page 11
2 Touch [PIN Code Input].
3 Touch [0] to [9] to input the pin code (up to 8
-digits).
4 Touch .
p The default PIN code is "0000"
Displaying the device
information
1 Display the "Bluetooth" screen.
 Displaying the "Bluetooth" screen on page 11
2 Touch [Device Information].
The device name and address of the Bluetooth device and this
product are displayed.

Clearing the Bluetooth memory

p This setting is available only when you stop your vehicle in a
safe place and apply the parking brake.
CAUTION
Never turn this product off while the Bluetooth memory is
being cleared.
1 Display the "Bluetooth" screen.
 Displaying the "Bluetooth" screen on page 11
2 Touch [Bluetooth Memory Clear].
12
3 Touch [Clear].
The confirmation screen appears.

Updating Bluetooth software

This function is used to update this product with the latest
Bluetooth software. For details on Bluetooth software and updat-
ing, refer to our website.
p The source is turned off and the Bluetooth connection is
disconnected before the process starts.
p This setting is available only when you stop your vehicle in a
safe place and apply the parking brake.
p You need to store the version up file to the USB storage
device in advance.
CAUTION
Never turn this product off and never disconnect the phone
while the software is being updated.
1 Connect the USB storage device stored the ver-
sion up file to this unit.
 Plugging and unplugging a USB storage device on page 8
2 Display the "Bluetooth" screen.
 Displaying the "Bluetooth" screen on page 11
3 Touch [BT Software Update].
4 Touch [Start].
Follow the on-screen instructions to finish updating the
Bluetooth software.
Displaying the Bluetooth soft-
ware version
If this product fails to operate properly, you may need to consult
your dealer for repair.
In such cases, perform the following procedure to check the
software version on this unit.
1 Display the "Bluetooth" screen.
 Displaying the "Bluetooth" screen on page 11
2 Touch [Bluetooth Version Information].
The version of this product's Bluetooth module appears.